Kenmore Elite dishwasher power cord fire recall 2015 — In October 2015, CPSC and BSH Home Appliances announced a voluntary recall covering Bosch, Gaggenau, Kenmore Elite, and Thermador dishwashers. The power cord connector could overheat and pose a fire hazard. The initial recall covered 149,000 units and was expanded to 557,000 total units in October 2017, including Kenmore Elite models sold exclusively through Sears.
Why this matters
BSH Home Appliances received 10 reports of the electrical cord connector overheating, including five reports of fire causing property damage before the initial recall announcement. The power cord connector junction was prone to developing resistance that caused heat buildup, which could ignite surrounding cabinetry or flooring.
Affected models
- Kenmore Elite built-in dishwashers (BSH-manufactured) — specific model numbers on recall lookup
- Manufactured from January 2008 through December 2013
- Sold at Sears stores from January 2009 through May 2014 for approximately from $850
- Model and serial numbers are on the top of the inner door panel
- Part of 557,000 total units recalled across Bosch, Gaggenau, Kenmore Elite, and Thermador brands
How to identify
Open the dishwasher door and look at the top edge of the inner door panel — model and serial number label is located there. Kenmore Elite dishwasher models from the 2008–2013 manufacturing window should be verified through the BSH recall lookup at the safety recall hotline.
Recommended action steps
- Contact the BSH safety recall hotline at 1-888-965-5813 any day of the week, 8:00 a.m. to 8:00 p.m. EST to verify your model and schedule free repair
- Watch for any burning smell or discoloration near the power cord connection behind or beneath the dishwasher
- A free replacement power cord will be installed by a factory-authorized technician
- Do not run the dishwasher unattended at night or while away from home until the repair is done
Urgency level
High. Fire hazard with confirmed fires. Kenmore Elite dishwashers from the 2008–2013 manufacturing window should be verified and repaired immediately.