Key Takeaways
- A Kenmore oven bake element replacement costs from $110 and is one of the most straightforward appliance repairs available.
- Oven temperature sensor replacement resolves inaccurate preheating and over- or under-cooking at a cost of from $130.
- Gas oven igniter replacement costs from $150 and should be done promptly — a weak igniter lets gas accumulate before lighting.
- Control board replacement is the most expensive routine oven repair at from $320 but restores all oven functions at once.
- Door gasket and hinge replacement costs from $100 and prevents heat loss that increases cooking times and energy bills.
The Bottom Line
Kenmore oven repairs cost from $110 for the most common failures and are nearly always worth doing — a new Kenmore range or wall oven costs from $700. Only very expensive repairs ($500+) on old units (15+ years) merit a replacement conversation.
Kenmore Oven Repair Costs: What to Expect
Whether your Kenmore oven is part of a freestanding range or a built-in wall unit, the most common failures follow a predictable pattern: bake elements burn out, igniters weaken, temperature sensors drift, and control boards occasionally fail. National repair data from Fixr and Angi puts average kenmore oven repair cost at from $150 for the majority of service calls. The outlier is control board replacement, which can reach $600 on complex models with electronic touch controls.
Typical Cost Ranges
| Issue | Parts | Labor | Total Cost |
|---|---|---|---|
| Bake element (electric) | from $20 | from $85 | from $110 |
| Broil element (electric) | from $20 | from $85 | from $110 |
| Oven temperature sensor | from $20 | from $85 | from $130 |
| Gas oven igniter | from $30 | from $100 | from $150 |
| Door gasket / seal | from $20 | from $60 | from $90 |
| Door hinge | from $25 | from $85 | from $120 |
| Door lock motor | from $30 | from $100 | from $145 |
| Convection fan motor | from $50 | from $100 | from $175 |
| Main control board | from $150 | from $100 | from $280 |
Why Kenmore Repair Costs Vary
Kenmore ovens and ranges are manufactured by Whirlpool and Frigidaire depending on the product line. Whirlpool-platform control boards (used in many Kenmore Elite range models) cost from $200 in parts. Frigidaire-platform boards run from $150. The other major cost variable is whether you have a gas or electric oven: gas models require igniters (from $30) and occasionally gas valve work (from $100), while electric models rely on elements (from $20) that are among the least expensive appliance parts on the market. This difference means gas oven repairs often cost from $50 more than equivalent electric repairs.
Repair vs Replace Threshold
Kenmore freestanding ranges retail for from $700 and built-in wall ovens for from $900. The 50% rule suggests repairs up to from $350 are worth doing depending on unit price. In practice, most oven repairs cost from $130 — well within the worth-repairing zone for all Kenmore oven types. Control board replacement at from $280 deserves more scrutiny on lower-priced units: a $500 board repair on a $700 range in year 12 of its life is a reasonable replacement trigger, while the same $500 repair on a $1,500 slide-in range is an easy yes.
DIY Savings Potential
Electric bake and broil elements are the most DIY-accessible oven repair — parts cost from $20 and installation usually requires only removing two screws. Oven temperature sensors are similarly straightforward on most models. Door gaskets can be replaced by hand on many Kenmore models without tools. Gas repairs — igniter, gas valve, burner orifices — should always involve a professional. A weak gas oven igniter is a safety concern because it allows unburned gas to accumulate in the oven cavity before the igniter gets hot enough to light it.
Get an Accurate Quote
Our Kenmore oven repair service covers gas and electric models in freestanding ranges and built-in wall ovens. Book a diagnostic visit to get a written estimate before any work begins. Most oven repairs complete in a single two-hour visit.